Schaub Lorenz 32LE-5900CT Manual de usuario Pagina 81

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 92
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 80
English - 80 -
When you select one of these satcodx files, all
services and related satellites and transponders in
the selected le will be stored in TV. If there are any
installed terrestrial, cable and/or analog services,
they will be kept and only satellite services will be
removed.
Afterwards, check your antenna settings and make
changes if necessary. An error message stating “No
Signal” may be displayed if antenna settings are not
con gured properly.
Con guring Network Settings
Note: Your TV’s Network Settings include Wired
and Wireless Connection options. However, if your
TV does not have USB Wi-Fi dongle, you should
use Wired Connection type. If you try to connect via
Wireless Connection when your TV does not have a
USB Wi-Fi dongle, a warning screen will appear and
the TV will not get an IP address. Try connecting the
LAN cable after this and then the TV will be able to
get an IP address.
Con guring Wired Device Settings
On Network Settings window you can set network
type of the TV set, which connects the TV to
the Internet. If you are connecting the TV via
ETHERNET INPUT, select Network Type as Wired
Device to con gure.
Setting Network Type
Network type can be selected as Wired or Wireless
device, in accordance with the active connection
to the TV set. Select this as Wired if you have
connected to the TV a LAN cable. Select as Wireless
if you connect via the wireless USB dongle.
Setting Con guration Status
This section displays the status of the connection.
Select Connected if you want to activate Wired or
Wireless connection. Select as Not Connected to
quit an active connection.
IP Address
If an active connection is available, the IP address
will be displayed on this section. If you want to
con gure IP address preferences, press YELLOW
button and switch to the advanced mode.
Con guring Wired Network Settings in
Advanced Mode
After pressing YELLOW button, Advanced mode will
be available. Press OK button to edit settings.
Con guring Other Settings
To view general con guration preferences, select
Other Settings in the Settings menu and press OK
button.
Operation
Press “ ” or “ ” buttons to select an item.
Use “
” or “ ” button to set an option.
Press OK button to view a sub-menu.
Menu Timeout: Changes timeout duration for menu
screens.
Active Antenna: This feature enables or disables
the use of active antennas. When antenna power
option is set as On, +5V will be transmitted to the
antenna output.
IMPORTANT: Antenna power should be Off when
standard antenna is used instead of the active
antenna.
Scan Encrypted: When this setting is on, search
process will locate the encrypted channels as well. If
it is set as Off, encrypted channels will not be located
in automatic search or manual
search.
Blue B
ackground: Activates or deactivates blue
background system when the signal is weak or
absent.
Vista de pagina 80
1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 91 92

Comentarios a estos manuales

Myo gyi 02 May 2025 | 10:03:10

Book