
device. USB and memory slot can solely playback MP3-format music.
- If you experience some noise or interference when playing content from
your iPhone or iPad, please put your device into airplane mode.
USB/DIGITAL CARD
It is possible to listen to audio files through the USB and Card reader.
1. Connect the USB device or a SD card to the speaker system.
2. Press the SD/USB button on the remote control to play the USB or CARD.
Press SD/USB button again to switch between USB and CARD modes.
3. Long time pressing the or button to fast rewind or fast forward;
Press the or button to go to the previous or next audio files.
4. To exit the USB/CARD mode: Press the iPod, FM/AUX button, and switch
to other modes.
The unit cannot read my USB device.
- Once you have plugged your USB device to the unit, you need to
switch to the USB mode before it can operate.
- This unit supports USB capacity up to 8G.
- This unit does not support a direct USB connection with a computer.
You need to use a USB device only.
- Check that the files system of your USB device is formatted into the
FAT or FAT 32 format. USB device formatted into NTFS are not
compatible with this unit. Caution: if you attempt to modify your file
system, formatting your device will erase all data. Please refer to
your USB device’s instruction manual first.
- Warning: Connect your USB device directly to the USB port of the
device. Using an extension cable is not recommended and may
cause interference and failure of data transfer.
The unit cannot read my memory card.
- Check firstly that your memory card is compatible with the unit.
Supported memory cards are SD, SDHC formats, and support the SD card
Comentarios a estos manuales